Industrial Silencer

Approx. Rs 1 Lakh / PieceGet Latest Price

• Excellent design
• Supreme strength
• Less maintenance

Additional Information:

Product Price :Get Latest Price

• Easy installation
• Sturdy design
• Corrosion-resistance

Specifications:

• Working Pressure: 0 ~ 150 PSI
• Working Temperature: 0-60 C(32 ~ 140 F)

Approx. Rs 1 Lakh / PieceGet Latest Price

• Easy to install
• Excellent toughness
• Highly durability

Specifications

• Size 3"
• Temperature -50 to +600 DegreeC

Additional Information:

Approx. Rs 1 Lakh / PieceGet Latest Price

• Size: 2' x 3.25' X 3.5' x 22.91'
• Material: Carbon / Stainless steel

Approx. Rs 1 Lakh / PieceGet Latest Price

• material: Stainless steel
• MOQ: 100 pcs

Approx. Rs 1 Lakh / PieceGet Latest Price

• Sturdy design
• Less maintenance
• High strength

• Type of Application: Vent, Relief Valve, Blow down, etc
• Type of Fluid Composition (Steam, Gas, Air )
• Molecular Weight or Specific Gravity
• Mass Flow Rate ( Kg/Hr )
• Fluid Temperature ( Deg.C )
• Fluid Pressure ( Kg/cm2)
• Line size between valve and silencer & Connection Type
• Line Size from silencer discharge
• Unsilenced Noise Level (dBA)
• Attenuation required
• Allowable pressure drop

Specifications:

• Diameter: 6" 150 mm
• compress rate: 1:10

Additional Information:

Approx. Rs 2 Lakh / PieceGet Latest Price

• The selection of the correct type of engine intake and exhaust silencer is determined by the type of engine
• The end use of the engine and the degree of silencing required
• Also, the silencer size selected must accommodate the specified volume of exhaust gas flow keeping the back pressure within the limits specified by the engine manufacturer
• Generally, engine silencers are broadly classified into following categories depending on the end use
• Commercial Grade or Industrial Grade
• Residential Grade
• Critical Grade
• Hospital Grade

• Engine exhaust gas flow (CFM)
• Exhaust gas temperature (Deg.C)
• Allowable back pressure (mmWC)
• Unsilenced Noise Level (DBA)
• Attenuation required
• Existing Line Size at outlet of engine exhaust

Specifications:

• Fineness 0.28 mm(mesh 60): ≤ 10.0 %
• Water solubles, %: ≤ 5

Approx. Rs 185 / KgGet Latest Price

• Safety valve steam vent & blow off Silencer
• Compressor & blower suction, discharge Silencer
• FD & ID Fan inlet & outlet silencer
• Engine Exhaust silencer
• GT exhaust silencer
• Air intake & exhaust silencer
• Silencer splitters

• Silencer can be rectangular or cylindrical in construction.
• The circular silencer is made of concentric annular acoustic cylinder enclosed in a robust steel casing with transition cone or dished end at both ends with inlet and outlet nozzles
• whereas a rectangular silencer is made of rectangular casing with acoustic baffles inserted.
• In vent silencer and blow of silencer application weather cowl and bird screen is provided at the outlet of the silencer
• Silencer splitter is a multilayer construction having perforated sheet packed with insulating Material, which is covered by protective wire mesh and glass cloth
• Either steel, galvanized steel or stainless steel is provided for internals based on the customer's choice

• Fabrication are done as per IS standard as well as ASME standard

Specifications:

• Size: 1000 mm x 2000 mm x 30 / 40 / 50 mm
• Hardness: 30 - 95

Approx. Rs 180 / KgGet Latest Price

• Flow: 2300 m3 / h
• Size: M 5 ~ 2
• Temperature(): -10 ~ 70

Additional Information:

Approx. Rs 180 / KgGet Latest Price

With the support of our adroit professionals, we provide our clients a high quality Blowoff Silencer. The provided silencer is well known in the market for its long functional life & enhanced durability. Offered silencer is designed by top quality material in adherence with the set standard of the market. Our offered silencer is obtainable in varied specifications in order to satisfy our customers.

Features:

• Scratch resistance
• Smooth finish
• Elegant look

• Safety valve steam vent & blow off Silencer
• Compressor & blower suction, discharge Silencer
• FD & ID Fan inlet & outlet silencer
• Engine Exhaust silencer
• GT exhaust silencer
• Air intake & exhaust silencer
• Silencer splitters

Specifications:

• Size: 15 cm x 16 cm x 17 cm
• Color: Silver

Product Price :Get Latest Price

• Power: 1.96 ~ 118 KW
• Voltage: 380 V / 440 V / 3 KV / 6 KV

Product Price :Get Latest Price

• Less maintenance
• Highly durability
• Optimum strength

Specifications:

• Item Weight: 1 kg
• Item Length: 1 inch

Product Price :Get Latest Price

• Scratch resistance
• Smooth finish
• Elegant look

• High frequency range: 500-8000 Hz
• Voltage: 220, 380 V

Product Price :Get Latest Price

• Power: 0.55 ~ 400 KW
• High Pressure: > 2940 - 14700 Pa

Approx. Rs 1 Lakh / PieceGet Latest Price

• Safety valve steam vent & blow off Silencer
• Compressor & blower suction, discharge Silencer
• FD & ID Fan inlet & outlet silencer
• Engine Exhaust silencer
• GT exhaust silencer
• Air intake & exhaust silencer
• Silencer splitters

• Silencer can be rectangular or cylindrical in construction
• The circular silencer is made of concentric annular acoustic cylinder enclosed in a robust steel casing with transition cone or dished end at both ends with inlet and outlet nozzles
• whereas a rectangular silencer is made of rectangular casing with acoustic baffles inserted
• In vent silencer and blow of silencer application weather cowl and bird screen is provided at the outlet of the silencer
• Silencer splitter is a multilayer construction having perforated sheet packed with insulating Material, which is covered by protective wire mesh and glass cloth
• Either steel, galvanized steel or stainless steel is provided for internals based on the customer's choice

• Fabrication are done as per IS standard as well as ASME standard

Specifications:

• Size: Small
• Power: 0.55 ~ 400 KW

Approx. Rs 1 Lakh / PieceGet Latest Price

Industrial fan installations, small or large, produce noise. This fan noise is one of the most predominant noise sources in an industrial plant. The magnitude and intensity of noise will vary depending on fan size, horse power, air flow, type and number of blades, static pressure, rotational speed, etc. Fans normally deliver a large volume of air at relatively low static pressures usually measured in inches of water. The rotating action of vanes produce a broad band noise spectrum however, the noise in mid to high frequency range is heard to be louder and requires to be treated for achieving noise control.Generally, silencers are used at intake and discharge of fan installations for treating air borne noise. Fan silencers usually require absorptive type design as they are well known for better attenuation in mid and high frequency range (500-8000 Hz). The effectiveness of absorption material progressively reduces at frequencies above an below this range. The noise control is achieved by means of absorption. The acoustic energy propagating through the silencer is effectively absorbed into the fibrous absorption material and converted into heat energy. These silencers generally employ straight through design and have a low pressure drop as it imposes very little restriction to the flow.

Specifications:

• High Frequency Range: 500-8000 Hz

Approx. Rs 1 Lakh / PIECEGet Latest Price

• Size: Inlet 2.5``
• Tip Diameter: 4"

Product Price :Get Latest Price

• Flow: 2300 m3 / h
• Voltage: 380 v
• Power: Electric

Product Price :Get Latest Price

We are a well known fabricator & supplier of Sparrow Silencer. Depending on the application area, we make available for our clients a vast range comprising different variants such as engine exhaust silencers, stack silencers, blower suction and discharge silencers, ID fan, FD fan inlet and outlet silencers.

• Weight: 82 G
• Carton size: 41.5 * 41 * 58 cm

Product Price :Get Latest Price

• Sizes: 1 NB to 36 NB
• Temperature: -50 to + 300°C

Product Price :Get Latest Price

• Working Pressure Range: 0 ~ 150 PSI / 0~9 Kgf / cm2 (0 ~ 900 kpa)
• Operating Pressure: 0 - 150 PSI

Product Price :Get Latest Price

• Weight: 0.8 kgs
• Size: 3' x 3.5' x 18.5'

Product Price :Get Latest Price

• Size: 50.38 x 29 x 2.5 mm

Approx. Rs 1.5 Lakh / PieceGet Latest Price

• Easy installation
• Low maintenance
• Long working life

Specifications:

• Size: 800 x 800 x 1200
• Weight: 800 kgs

Additional Information:

Product Price :Get Latest Price

• Air flow rate (Actual CFM)
• Temperature (Deg.C)
• Pressure (PSIG)
• Unsilenced Noise Level (dBA)
• Attenuation required
• Maximum allowable pressure drop (mmWC)
• Required line size
• Application - Suction or Discharge

Specifications:

• Size: 1/4, 3/8, 1/2 33 x 1.5 1" 0.6 0.9 cubes

Approx. Rs 50,000 / PieceGet Latest Price

• Safety valve steam vent & blow off Silencer,
• Compressor & blower suction, discharge Silencer.
• FD & ID Fan inlet & outlet silencer
• Engine Exhaust silencer
• GT exhaust silencer
• Air intake & exhaust silencer
• Silencer splitters

• Silencer can be rectangular or cylindrical in construction.
• The circular silencer is made of concentric annular acoustic cylinder enclosed in a robust steel casing with transition cone
• Dished end at both ends with inlet and outlet nozzles., whereas a rectangular silencer is made of rectangular casing with acoustic baffles inserted
• In vent silencer and blow of silencer application weather cowl and bird screen is provided at the outlet of the silencer
• Silencer splitter is a multilayer construction having perforated sheet packed with insulating Material, which is covered by protective wire mesh and glass cloth
• Either steel, galvanized steel or stainless steel is provided for internals based on the customer's choice

• Fabrication are done as per IS standard as well as ASME standard

• Air flow rate (Actual CFM)
• Temperature (Deg.C)
• Pressure (PSIG)
• Unsilenced Noise Level (dBA)
• Attenuation required
• Maximum allowable pressure drop (mmWC)
• Required line size

• High Frequency Range: 500-8000 Hz
• Power: 0.55 ~ 400 KW
• Dimension(L*W*H): 4"

Product Price :Get Latest Price

Specifications:

• Discharge silencer for compressor: Flow rate 130 m³/min
• Noise reduction: 25 dBA from existing noise level

Product Price :Get Latest Price

• Temperature: 275° F (135° C)